Thank you for a successful Kickstarter thus far with still 24 days to go! As a thank you and as an early release for what would have been featured on Pico 2.0, we are offering you the capability to print at 500° Celsius if we reach funding of $40,000 or more.
We are now offering a high quality thermistor (temperature sensor) which enables Pico to print up to 500° Celsius (932°Fahrenheit). To be clear, this a thermistor and not a thermocouple, which means a plug and play solution with a downloadable temperature table to update your firmware for RepRap printers!
B3 is all about breaking barriers and removing limits. This advanced breakthrough offers you two benefits: First, the ability to print Polycarbonate (PC) at or above 300° Celsius. High speed printing of PC or tuning a good print for PC requires to print just above 300° Celsius; And second, with new materials on the horizon that demand temperatures above 300° Celsius, you and Pico will be the only ones ready.
This option was previously unavailable to us because of the high minimum order quantity associated with these thermistors. Now we have the opportunity to offer this technology and supply a product that is ready for the future, if we reach the $40,000 stretch goal.
We promise this will not increase normal delivery times. You will still receive your items by the estimated delivery dates, but for those who are interested, check out your options below.
I’ll wait for the new 500° Celsius thermistor: We will send you the brand new 500° Celsius thermistor installed on your Pico. Estimated delivery increases by 1 month
I can’t wait, but I want it!: We will ship your pico with the normal thermistor, then ship the brand new 500° Celsius thermistor when it’s ready for an additional $7 to your pledge (or $12 for 2 thermistors)
Thanks, but no thanks: We will send you what you originally ordered. Estimated delivery stays the same
Please spread the word through the community so we can make this a reality!
Print On, Printers,
Will and Mike